lyngen driflex3 Pants (M)



Weight 614 gr. | Model nr. 3201-15
A super comfortable combination of full weather protection and the comfort of stretch. driflex3 is a special 3 layer stretchy, non-porous, hydro­philic membrane utilizing a stretch woven face fabric, a printed PU membrane and a micropolyester backer. Technical Specifications:Waterproof: 20,000 mm *Breathability: Very Good, min. 20,000 **Windproofness: 100%* ISO811-test** JIS-L 1099 B1-inverted cup test
Washing your GORE-TEX® and dri products will prolong the life of the product. This is how you should wash GORE-TEX® and dri products: Remember to close all zippers and Velcro. The garment should be washed at 40 degrees, with a mild detergent and no softening or rinsing agents. Do not use bleach. Softeners, rinsing agents and bleaches can damage the fabric’s water-resistant properties (not the membrane/waterproofing) and the color of the fabric. Rinse the garment twice, if possible. Use water repellent spray on the outside of the garment after washing for optimal water-resistance (this has nothing to do with the waterproof quality of the garment, but makes it easier for water to roll off the outer fabric). Dry the garment on a low setting in the dryer, if you like, or iron it at a low temperature. Warmth helps to reactivate the waterproofing. The garment must be dry before washing and before being put away.
Washing and product care
Technical details Aramid lower leg reinforcement
Aramid is a heavy duty fiber that is difficult to dye, so it will always have the same color
3/4 side zippers for ventilation with YKK water resistant zippers
Technical details Zip-seal system™
Zip-seal system™ to connect jackets and pants together